Your packing box should contain the following items:
The VisionAV-SDI data capture card.
(For latest drivers go to www.datapath.co.uk).
NOTE:
All plug-in cards are static sensitive and are packed in
antistatic materials. Please keep the card in its
packaging until you are ready to install.
You are likely to need a flat blade and /or a cross head
screwdriver for the installation of the VisionAV-SDI card; it
would be useful to have these to hand before you begin.
Power down the PC (including peripherals), switch off at
the mains and disconnect all the cables connected to the
computer, noting the positions for accurate reconnection.
Remove the PC cover.
Locate a vacant PCI Express slot (x4 or higher) on the
motherboard and remove the backing plate (retain all
screws).
If in doubt consult your motherboard documentation to
correctly identify a PCI Express slot.
Remove the VisionAV-SDI card from its packaging and
secure it firmly into the empty PCI Express slot.
Reconnect all cables to the PC then connect the cables
distributing the required video signals to the connectors on
the VisionAV-SDI card.
PACKING LIST
HARDWARE INSTALLATION
SOFTWARE INSTALLATION
We suggest that you regularly visit the Datapath web site
for information on updated drivers.
www.datapath.co.uk
It is strongly recommended that you read the detailed
help instructions on completion of the installation. Each
help topic may be printed for ease of use.
Download the required driver
install.exe
from the
Support pages on the Datapath website and follow the
Installation Wizard instructions as prompted.
FL
Y-
VA
V-EN3-
V1.0
