We are continuously developing the technology used within our product ranges delivering outstanding
innovative solutions, therefore the specification may change from time to time.
* Denotes availability Q4 2012, contact Sales for details.
Unpacking
Your packing box should contain the following items:
VisionAV/F
VisionAV/H
VisionAV/B
Base VisionAV Card
√
√
√
Audio Module Card
√
Fitted to base
card
√
X
1 x Full height bracket
√
Fitted to base
card
X
√
Fitted to base
card
1 x Half height bracket
X
√
One fitted to each
board
√
1 x Ribbon Cable Long
X
√
X
1 x Ribbon Cable Short
√
Fitted to base
card
X
X
1 x Audio Breakout
Cable
√
√
X
1 x DVI/VGA Adapter
√
√
√
1 x DVI/Component
Adapter
√
√
√
1 x DVI/HDMI Adapter
√
√
√
Installation CD
√
√
√
Note:
All plug-in cards are static sensitive and are packed in anti-static material. Please keep the card in its
packaging until you are ready to install.
It is recommended that you do not discard the packing box until you are completely satisfied with
the VisionAV capture card and it is fully installed and working correctly. We also recommend that you
make a note of the serial number of the card in a prominent place before the card is plugged into the
computer. This should hasten any query should you need to contact our Technical Support
Department. The serial number is displayed on the card itself and the box label.
Power Requirements
Max current at 12V – 0.5A
Max current at 3.3V – 0.2A
Thermal dissipation – 6.5W
Operating Temperature
0 to 35 ºC ( 32 to 96ºF)
Storage Temperature
-20 to 70 ºC ( -4 to 158ºF)
Relative Humidity
5% to 90% non-condensing
Warranty
3 years
