AP25 Installation and Operating Guide
Page 45
AP25 Installation & Operating Guide
Document # 9301H79500 Ver. 1.00
The following example describes how to create “non-sync 2” format, with stereo input, global delay of 0
ms, assignment of EQ and audio profile.
1. Open the Audio Format Setup screen.
Menu (System) > Formats
2. Next, select
Edit Formats
. The Audio Format Edit screen displays.
3. On the left side choose the Copy Format radio button.
4. Under
Copy Format From
select
Nonsync
.
5. Touch the blank box under
to Format
. A keyboard will appear.
Type in
Nonsync 2
, then select
OK
. The Audio Format Edit screen will return.
6. Touch the
Copy
button.
The screen will now change to Audio Format Setup.
7. Select
Assign Buttons
and the Format Button Assignments screen will display. Select an
unused button number from the
Buttons
dropdown menu. In this example select button 3.
8. Next from the
Assign
dropdown list, select
Nonsync 2
. Then touch the
Assign
button on the
right side of the screen. In the Current Assignments listing on the screen, Button 3 will now be
assigned to
Nonsync 2
.
9. At the bottom of the screen, touch the
Back
button to return to the Audio Format Setup screen.
10. Select the
Input Source
button. This will open the Input Select screen.
The right side of the screen should display “
Current Format: Nonsync2
”.
If it is not displayed, return to the Audio Format Setup screen by selecting the
Format
button
and selecting
Nonsync 2
in the
Current Audio Format
dropdown menu. Return to the Input
Select screen by touching the
Input Source
button.
11. In the Analog input section, touch the
NonSync1 L/R
option to change it to
NonSync2 L/R
.
Then touch the
Back
button to return to the Audio Format Setup screen.
12. In the Audio Format Setup screen, select the
Format Options
button to go to the Format
Options screen.
13. In the Format Options screen, you can (if necessary) set the
Global Delay
for the selected
format.
Select the
Nonsync Level and Routing
button to change input gain and routing of the Nonsync
signal.
Touch the
Back
button to return to the Audio Format Setup screen.
4.0 Setup Menus
On the next five pages, you will find a menu diagram for the AP25. This chapter contains a detailed
description of all the screens under the "Menu" selection of the home page. Refer to section 1.4 for all
operations under the "Home" screen.
For information on AP25 System Setup configurations, see section 4.2.
For information on Audio Format setup and changes, see section 4.3.
For information on Network connections and changes, see section 4.4.
For information on Automation events, cues, macros and assigning buttons, see section 4.5.
The full menu structure of the AP25 is shown on the next five pages.
