DN200 User Manual Rel 1.0
It is advisable to change the Ethernet settings of Eth 1 and Eth 2 ports. If this is not needed at this stage skip to
the next step. This setting can be found in the
Configuration
tab. The tab is designed for a top down workflow. If
Ethernet settings have been changed, click on
Save.
The confirmation screen will be displayed. Now click on
Home
and then click
Reboot
. The unit takes about 60 secs to reboot. Make sure your Laptop/PC is on the same
subnet as the DN200 Ethernet. If unsure, ask your network administrator.
The
Configuration
tab also sets up the radio interfaces. The GUI automatically picks up the radio interfaces and
will display their current settings on the page.