DN200 User Manual Rel 1.0
Introduction
The Datasat DN200 is a rugged, full outdoor quad-radio 2x2 MIMO outdoor-rated wireless network
system that is designed for the deployment of advanced IEEE 802.11 wireless services in harsh
environments. The DN200 can provide IEEE 802.11 wireless service to local wireless clients by
simultaneously providing backhaul and access services from the same unit with no bandwidth reduction.
Not only can the DN200 simultaneously provide 802.11 a/b/g/n services from the same unit by using
multiple interfaces, it can also inject inline power to PoE capable devices, such as cameras, attached
directly, thus eliminating home run cabling. Aside from being able to power directly attached external
devices, the DN200 itself is capable of being powered through PoE with an optional PoE injector.
Two or more DN200 models can provide point-to-point or point-to-multipoint links between remote
Ethernet LANs, and can simultaneously serve wireless service for local clients. The wireless system
offers a fast, reliable, and cost-effective solution for connectivity between remote Ethernet LANs or to
provide Internet access to an isolated site. The DN200 is unique as it is a multi radio, multi band and
multi mode system, that can be used in a multiple scenarios by skilled network planners.
The DN200 is a stand-alone device that provides the following capabilities:
•
Dual Band Wireless Access Point (802.11a/b/g/n) with support for wireless access over 5 GHz or
2.4Ghz
•
Point-to-point and point-to-multipoint access point, bridge and router functions for 5 GHz and 2.4
GHz
•
Eight RP-TNC type detachable antenna interfaces, two of each for every radio.
Please note
: Only
approved and link budget safe antennas may be used with the DN200. Using non-approved antennas
may violate local regulations and it is the duty of the installer to check the legality of the link budgets
conducted.
•
Two Gigabit Ethernet interfaces, with Power over Ethernet IN/OUT. The PoE implementation partly
complies with the 802.3at standard. For pin-outs and correct cabling, please get in touch with Datasat
Technologies for PoE implementation.
The DN200 requires detachable antennas, sold separately. Please see Appendix A for details on antennas.
Datasat Technologies’ DN200 Wireless network systems are radio transmission devices and as such are
subject to governmental regulations. Datasat Technologies Wireless network systems are sold through
authorized, non-retail, distribution channels and are required to be deployed by a Professional Installer /
Qualified Network Administrator. The professional installer responsible for the configuration and
operation of Access Points must ensure that the installation complies with local regulations, frequencies,
channels and output power.