XD20 Installation and Operating Guide
Version 1.1
Document # 9301H264001.1
91
7.7.2. Output Start Pulse
This menu defines whether the start pulse will be used for this playlist type. The start pulse must also be
defined as one of the XD20 Control Output Pins. See Section 7.6.1.2,
Output Control Pins
.
Automation
→
Playlist (Option 2)
Enable
Start pulse is enabled. Pulse timing is determined by the start pulse delay.
Disable
Start pulse is not used for this playlist.
7.7.3. Start Pulse Delay
This menu allows you to select the start pulse delay time to any time within the first 120 seconds after the
start of the playlist.
Automation
→
Playlist (Option 3)
0 - 120
Number of seconds delay after the playlist starts before the start pulse
occurs.
7.7.4. Output End Pulse
This menu allows the end pulse to be enabled or disabled for the selected playlist type. The End Pulse
must also be defined as one of the XD20 Control Output Pins. See Section 7.6.1.2,
Output Control Pins
.
Automation
→
Playlist (Option 4)
Enable
End pulse is enabled. Pulse timing is determined by the end pulse delay.
Disable
End pulse is not used for this playlist type.
7.7.5. End Pulse Delay
This menu allows the control of the end pulse timing anywhere within 60 seconds before to 60 seconds
after the end of the playlist. A negative value is used to indicate that the pulse occurs before the end of the
playlist.
Automation
→
Playlist (Option 5)
-60 to 60
Number of seconds offset between the end pulse and the end of the
playlist.
