XD20 Installation and Operating Guide
Version 1.1
Appendix E. TCR Head Brackets
E-1
Document #: 9301H264001.1
Appendix E. Timecode Reader Head Mounting Brackets
Timecode Reader Head Mounting Brackets – Parts List
Description
Part No.
Page
Standard Bracket
D614C
E-3
Universal Bracket
D615A
E-3
Phillips AA Bracket (Norelco DP70)
D616B
E-4
“L” Bracket (Kinoton DP75)
D617A
E-4
Cinemeccanica Bracket / adaptor plate (35 mm only)
SCD5006000100
E-5
Front-Mount “L” Bracket
D622B
E-5
“Bracket, Phillips AA (Norelco) 70mm (Not shown)
D632A
E-6
“Bracket, “L” AA2, 70mm (Not shown)
D633A
E-7
Projector bracket, 70mm "C" (E650 Rev. A) (Not shown)
E650A
E-8
Breakaway Version of Standard Bracket for 35/70mm
D625B
E-9
35mm TC Head Breakaway Adapter Plate (use w/ D625)
D626A
E-10
70mm TC Head Breakaway Adapter Plate (use w/ D625)
D627A
E-10
Breakaway Mounting Plate for D615 Universal Bracket
(use w/ D626 & D627 Adapter Plates)
D628B E-11
Timecode Reader Head Mounting Brackets - Description
•
D614 - Standard Bracket (35mm only)
– cannot be used with breakaway plates
For projectors: Century, Simplex, and Cinemeccanica with Kelmar bracket (below).
Intended to fit between the projector and reel arm. We have produced the bracket with the
American standard size hole to accommodate 2 inch center spacing 3/8 - 16 tap, that is
utilized to mount the American-made upper reel arms. Comes with the following hardware:
Qty Description
2
10 x 24 x ½” long screw
2
¾ x 16 x 1” long hex bolt nut
2
3/8” lock washer
•
D615 - DP70 Universal Bracket (35mm only)
Used for American projectors with a penthouse. Comes with tap and drill bit 8-32, and the
following hardware:
Qty Description
2
10 x 24 x ½ in. long screw
2
¾ x 16 x 1 in. long hex bolt nut
2
3/8 in. lock washer
