XD20 Installation and Operating Guide
Version 1.1
Document # 9301H264001.1
24
Film
Use this menu to change playback parameters relating either to feature film
and trailer soundtrack or CSS playback.
External Input
Use this menu to allow the XD20 to route audio from the external digital
or S/PDIF input on the rear panel through to the cinema processor.
Load from USB
Enter this menu load XD20 Content (Video, ACV, CSS or Sountrack), or
load an XD20 software update or License file from a USB storage device.
Exit Menus
Return to the status display.
3.2.1. Video Playback Functions
The Video Playback
menu, shown below,
contains functions to start, stop and control video playback.
Playback
→
Video
Start
Start playing one of the playlists currently installed on the XD20. See
Start
Playlist Functions
,on page 25.
Stop
Stop the playlist that is currently playing. See
Stop Playlist,
on page 25.
Control
Control video using commands to fast forward, rewind, pause, resume, or
seek to a specific position in the currently playing clip.
See Video Control,on page 25.
Contents
This menu displays information about videos and playlists installed on the
XD20.
Note
: The XD20 will delete old content automatically when the
hard drive is full. The user does not have the ability to selectively delete
video content on the XD20 unit.
See Video Contents
,
on page 26.
Exit Menus
Return to the status display.
Note
: Access is denied to this menu unless your XD20 has the Video Option installed. If the
XD20 has no license for the HD Video Option, the message shown below will display when
you try to access the Video Playlist.
If the video card is not installed or does not work, the following message will appear.
In the case of an installed video card not working, contact Datasat Digital Entertainment
Technical Support – see
Contact Information
, page xi.