XD20 Installation and Operating Guide
Version 1.1
Document # 9301H264001.1
63
At this point the XD20 software resets:
The software update is complete when the “Ready” message appears on the display.
7. Setup Menus
The Setup menu contains all configurable settings for XD20 that should be set by the technician and are
not expected to change during day-to-day operations. The setup menu can be password protected to
assure that the configuration does not change after the technician leaves.
Select
Setup
from the Main menu.
Select Setup
If the XD20 unit is password-protected, the menu shown below will appear. The default mode for XD20
is with the password disabled. If the password is disabled, this menu will not appear.
The cursor is the ‘*’ underneath one of the three digits.
►
Moves cursor to the right.
◄
Moves cursor to the left, or returns to the Main Menu if at the first
position.
▲
Increments digit at cursor position. Wraps from 9 to 0.
▼
Decrements digit at cursor position. Wraps from 0 to 9.
Enter
Press to enter the password.
If the correct password is entered and
Enter
is pressed, the System Setup menu will appear. If an
incorrect password is entered, the following message will appear.
Press
Enter
to reenter the correct password. If you forget the password, contact Datasat Digital
Entertainment Technical Support and a Technical Service Representative will help you to regain access to
the XD20. (See
Contact Information
, page xi.)
