XD20 Installation and Operating Guide
Version 1.1
Document # 9301H264001.1
85
7.6. I/O Control
The I/O CONTROL menu is used to configure the pin definitions, and to automate soundtrack and CSS
languages using the AUX I/O connector. (This is NOT the same as cinema processor automation control.)
Setup
→
Automation
→
I/O Control
Pin Definitions
Enters menu to assign I/O pins to functions.
Language Setups
Enters menu to define the soundtrack and subtitle languages for any of the
three language setups and the default languages.
7.6.1. I/O Pin Definitions
The I/O Pin Definitions menu is used to configure the auxiliary control input and output signals
on the AUX I/O connector.
Automation
→
I/O Control
→
Pin Definitions
Inputs
Menu to assign functions to the input pins.
Outputs
Menu to assign functions to the output pins.
Exit Menus
Returns to the Status display.
7.6.1.1. Input Control Pins
This menu is used to assign functions to input control pins. The assigned function is executed when a low
level pulse is detected on the corresponding input pin. There are three separate input pins that can be
assigned. When entering this menu, the current assigned values are displayed next to the pin number, as
shown below.
I/O Control
→
Pin Definitions
→
Inputs
