4209-00009-000 EasyRead (DSV3-EP) User’s Manual
Rev 0E
6/29/2009
18
Copyright © 2009 by Datastrip, Inc. All rights reserved.
Reproduction in whole or in part is prohibited.
7.1.1
DSV3 Software Update Procedure: Using a CF Card
NOTE: It is recommended that upgrades be done with the unit operating on the AC adapter to ensure that
the unit does not lose power during this procedure.
•
Insert the CF Card containing the new CAB file into the external CF slot.
•
Power up the DSV3 terminal.
•
When the device is finished booting, navigate to
My Device
\
Hard Disk\DSV3
.
•
Double tap the
DsVerify2SoftwareUpdate
utility.
•
Scroll through the options on the
Server
scroll box and select the
Storage Card
entry (you must
scroll down to make selection).
•
Username
and
Password
are not necessary for this procedure
•
Select most recent appropriate source file
•
Click
Update
•
Click
Reboot
(The registry will be cleared prior to shutdown).
•
Power up the unit.
•
The DSV3 registration program will automatically open. Select the button for the device that you
are registering (
DSV3-SP
or
DSV3-EP
). Select [
OK
] and wait.
•
Click
[OK]
in the “
Hurray!
” box when it appears, then close the application window.
•
Navigate to
My Device\Hard Disk\DSV3
.
•
Double tap the Registry Saver program (
RegistrySaver.exe
) to launch it.
•
Double tap the
PPCalFt41
utility and press the “
Calibrate
” button to initialize the fingerprint
sensor. Once complete, a “green” window with a number “1” should appear to indicate the sensor
was successfully calibrated.
•
Double tap the
DsVerifyFpCaptureTest
application. Look in the lower right hand corner to
ensure that the
UPEK
button is selected
.
You can use the
Scan
function to test the fingerprint
image. DO NOT use the
Calibrate
button on this screen since it does not work with the
fingerprint sensor in the DSV3. When done, click “
OK
” to exit the program.
7.1.2
DSV3 Software Update Procedure: Using a USB Flash Drive
To load a software update from a USB flash memory device, follow the procedure from section 7.1.1 with
the following changes:
•
Insert a USB Flash drive (instead of a CF Card) into the USB Host port on the DSV3 terminal.
•
Inside the
DsVerify2SoftwareUpdate
utility, select
Hard Disk 2
option from the
Server
scroll box
(instead of selecting
Storage Card
).
7.1.3
DSV3 Software Update Procedure: Using an FTP site
NOTE
: It is recommended that upgrades be done with the unit operating on the AC adapter.
•
Power up the DSV3 terminal.
•
When the device is finished booting, navigate to
My Device
\
Hard Disk\DSV3
.
•
Double tap the
DsVerify2SoftwareUpdate
utility.
•
Scroll through the options on the
Server
scroll box and:
§
Select
ftp.datastrip.net
if you have access to the Datastrip FTP server
§
Select
ftpserv2003
if you are using another valid FTP site.
•
Enter a valid
Username
and
Password.
•
Click
Connect.
•
Select most recent appropriate source file.
•
Click
Download
and wait for message “
Download complete
”.
•
Click
Update.
•
Click
Reboot.
•
Power up the unit.
