4209-00009-000 EasyRead (DSV3-EP) User’s Manual
Rev 0E
6/29/2009
19
Copyright © 2009 by Datastrip, Inc. All rights reserved.
Reproduction in whole or in part is prohibited.
•
The DSV3 registration program will automatically open. Select the button for the device that you
are registering (
DSV3-SP
or
DSV3-EP
). Select [
OK
] and wait.
•
Click [
Ok
] in the “
Hurray!
” box when it appears, then close the application window.
•
Navigate to
My Device\Hard Disk\DSV3
.
•
Double tap the Registry Saver program (
RegistrySaver.exe
) to launch it.
•
Double tap the
PPCalFt41
utility and press the “
Calibrate
” button to initialize the fingerprint
sensor. Once complete, a “green” window with a number “1” should appear to indicate the sensor
was successfully calibrated.
•
Double tap the
DsVerifyFpCaptureTest
application. Look in the lower right hand corner to
ensure that the
UPEK
button is selected
.
You can use the
Scan
function to test the fingerprint
image. DO NOT use the
Calibrate
button on this screen since it does not work with the
fingerprint sensor in the DSV3 product family. When done, click “
OK
” to exit the program.
7.2
Loading Smartcard Firmware Updates
The procedure for updating the smartcard firmware is as follows:
•
In the directory
My Device\Hard Disk\DSV3
folder, run the utility
DsVerifyCleanUp
and select
the option
Clear SCM Firmware
. Answer “
OK
” to the question “
Are you REALLY sure
”.
•
Reboot the terminal.
•
When the device is finished booting, navigate to the
My Device\Hard Disk\DSV3
folder.
•
Open the
DSV3_SCM_Firmware
folder.
•
Double tap the utility
FlashIt
•
Tap the button “
Open bin file
” and navigate to
My Device\ Hard
Disk\DSV3\DSV3_SCM_Firmware
•
Select the version of firmware that you are changing to and click “
OK
”.
•
Status should read “
Binary file is valid
”.
•
Tap the
Download
button.
•
Reboot the terminal to complete update.
7.3
Loading Flash Memory Updates
The various flash areas in the DSV3 can be updated by using the utility program
“DSV3FlashUpdate.exe”
, located in the
“\Hard Disk\DSV3”
folder. This application allows these areas
of the flash to be updated:
•
Embedded Controller
•
Splash Screen bitmap
•
SafeBoot OS image
•
BIOS
The procedure for updating the Flash Memory firmware is as follows:
•
Copy the new flash update file that is to be loaded onto the unit onto a Compact Flash card, and
insert the card into the mobile terminals.
•
Browse to “
My Device\Hard Disk\DSV3\
” and run “
DSV3FlashUpdate.exe
”.
•
Select one of the four buttons displayed as follows:
§
Update BIOS
§
Update SafeBoot OS
§
Update Splash Screen
§
Update EC
