4209-00009-000 EasyRead (DSV3-EP) User’s Manual
Rev 0E
6/29/2009
24
Copyright © 2009 by Datastrip, Inc. All rights reserved.
Reproduction in whole or in part is prohibited.
Decode: Total). e.g. S:5.3 F:0.1 D:0.6 T:6.0.
•
Clicking on the ‘
Decode Settings
’ button will open the
Find Decode Settings
screen. Refer to the
Find Decode Settings Screen below for details.
•
Clicking on the ‘
General Settings
’ button will open the
General Settings
screen. To use the
feature, check the “
Use GUI Buttons
” box, and return to the
Main Screen
. The GUI buttons
“Photo”, “Text”,
and
“Fingerprint”
will be displayed above the windows.
•
Clicking on the “Datastrip” logo button will bring the application back to the
Main Screen
.
•
Clicking on the ‘
Toolbox’
has no effect.
•
Clicking on the ‘
OK’
or ‘
X’
will exit the application.
Fingerprint Settings Screen
On the
Fingerprint Settings
screen, a user can configure the thresholds used by
the fingerprint matching algorithms. Cogent and Identix are the different
fingerprint algorithms that can be licensed for use on the DSV3 terminals. A
higher number tells the system to require a better match of the fingerprints.
Typical threshold values are:
§
Cogent: 1000
§
Identix: Low = 200, High= Not used
•
Clicking on the ‘
OK’
will save the settings and return the application to
the
Configuration
screen.
•
Clicking on the ‘
Cancel’
or the
‘X’
will abort any changes to the settings
and return the application to the
Configuration
screen.
Scanner Settings Screen
On the
Scanner Settings
screen, a user can configure parameters for the optical
scanner. This is only necessary for DSVII mobile terminals equipped with an
optical scanner, and does not apply to the DSV3 product family.
Find Decode Settings Screen
On the
Find Decode Settings
screen, a user configures the type of optical
symbology the system will decode. Only one symbology at a time can be
selected.
•
Select the type of ‘symbol’ that the unit will Find and Decode from this
screen. The choices are
Datastrip, OCRB, PDF417
, or
Barcode
.
§
Datastrip
: Datastrip2D and 2DSuperscript two-dimensional
barcodes.
(Not supported by DSV3 terminals.)
§
OCRB
: OCRB text
§
PDF417
: PDF417 two-dimensional barcode
§
Barcode
: a variety of linear (1 dimensional) barcodes
•
Clicking on ‘
OK’
will save the settings and return the application to the
Configuration
screen.
•
Clicking on the ‘
Cancel’
or the
‘X’
will abort any changes to the settings and return the application
to the
Configuration
screen.
