44208-00006-000 DSV3-SP User’s Manual
Rev 0B
2/12/2009
16
Copyright © 2009 by Datastrip, Inc. All rights reserved.
Reproduction in whole or in part is prohibited.
The power management states are:
•
Fully On
Every subsystem in the mobile terminal is on and operational
•
User Idle
This state is entered when the touch screen or function keys have not been used for some
amount of time (user configurable).
The backlight is dimmed to save power.
All other internal subsystems are on.
Tap the screen or give the power button a quick tap to wake up the unit to a Fully On
condition.
•
System Idle
This state is entered when no major background software tasks are running and the touch
screen or function keys have not been used for some amount of time (user configurable).
In this state, the backlight is dimmed to save power.
All other internal subsystems are on.
Tap the screen or give the power button a quick tap to wake up the unit to a fully on
condition.
•
Suspend
This state is entered when no major background software tasks are running and the touch
screen or function keys have not been used for some amount of time (user configurable).
Suspend mode is indicated by flashing power LED Indicator (see section 4.2).
In this state, the LCD is turned off and backlight is turned off.
USB subsystem is turned off.
CF cards are turned off.
The Processor is put in low power sleep mode.
Tap the screen or give the power button a quick tap to wake up the unit to a fully on
condition.
•
Fully Off
Everything in the system is off (except the embedded controller).
Push the power button to start the unit and return to a Fully On state.
