background image

44

Getting Started with DT800 

dataTaker

UM-0071-A0

trends to as many as six Y axes (linear or logarithmic). 
You can also open additional chart windows if 
necessary. (To add a chart window, choose 

New

 on 

the File menu, then click the 

Chart

 button.)

You can watch the trends update as the real-time or 
replay data arrives, or you can home-in on a section of 
the data already charted (while incoming data 
continues to be recorded by the window).

Time (vertical) and data (horizontal) rulers allow you to 
read precise coordinates from the trends (Figure 47).

Mouse Power

In a DeLogger chart window, you use the mouse to 
select and scale sections of the trend graphs for 
optimal viewing of regions you’re interested in. Figures 
45 and 46 show how you do this.

An information bar

appears when you rest

the mouse over a graph’s 

Show/hide

 button. 

Play Chart 

button (and indicator). 

The chart moves (like the paper in a 

chart recorder) and new data enters 

the right-hand side of the trend area 

when when this button is pressed (lit).

Relocate a graph and its scale 

by dragging its 

scale handle

.

Connection

Channel 

label

 (from the 

channel’s Label column in 

the program builder)

Schedule

 (A, B, C,…K)

The graph’s 

data point 

symbol

 (if you’ve applied 

one — double-click in the 

trend area and go to the 

Curves tab in the dialog 

box that opens)

Axis label

Select channels

 to be plotted in this chart window (the Chart Channels 

dialog box opens). Only available when the window is in Edit Mode.

Click the 

Auto Re-scale

 button to fit the trend graphs into the chart 

window with maximum horizontal and vertical resolution (squeezes 

all the data into the window).

Rotate

 the graphs so that they move from top to bottom.

Open the chart window’s 

Properties

 dialog box

(to control the display of realtime and/or logged data). 

Only available when the window is in Edit Mode.

Clear

 the chart window. Only available 

when the window is in Edit Mode.

Pause

 the return of data. 

Only available when the 

window is in Run Mode.
Turn 

Edit Mode

 on/off.

“Edit” appears after the window name in the 

title bar when the window is in Edit Mode.

F

IGURE 

44

More features of the DeLogger chart window

Summary of Contents for DT800











































































Reviews: