4
PRECAUTIONS FOR THE ENCLOSURE
♦
The main circuit board of the Enclosure is susceptible to static
electricity. Proper grounding is required to prevent electrical damage
to the Enclosure or other connected devices, including the host
computer.
Always
place the Enclosure on a smooth surface and avoid
all dramatic movement, vibration and percussion.
♦
Do
NOT
allow water to enter the Enclosure.
♦
Do
NOT
place the Enclosure close to magnetic devices (such as a
mobile phone), high-voltage devices (such as a hair dryer), or near a
heat source (such as on the dashboard of a car or any place where the
Enclosure will be exposed to direct sunlight).
♦
Use only
the bus-powered USB and/or FireWire cables provided with
the Enclosure.
♦
Use only
a 9.5mm high 2.5” HDD inside the Enclosure. The Enclosure
may not function properly if a HDD with a different thickness is used.
In addition, the Enclosure and HDD may be damaged.
Summary of Contents for FireWire 400
Page 1: ...1 Rev 01...
