InstallatIon and operatIon 7
2. INSTALLATION AND OPERATION
BEFORE USING YOUR WATCHPAX 4
please read the manual thoroughly before operation. WatCHpaX 4 is a plug-and-play unit – do not
open, modify or repair the unit yourself. this invalidates the warranty and presents a risk for the user.
SAFETY FIRST
This product must be grounded. Ensure you connect the power plug to a grounded power socket.
•
to reduce risk of electrical shock, do not remove cover. refer all servicing to dataton. the unit shall
be connected to a grounded outlet.
•
High voltage runs through the product. do not attempt to disassemble, repair, or modify the product
on your own. any attempt to do so will void the warranty.
•
do not use a damaged power cord or plug.
•
do not touch the power plug with wet hands.
•
Insert the power plug all the way in, so it is not loose.
•
do not place the power cord or product near heat sources.
•
avoid installing the product in a narrow space with bad ventilation. always keep front and back of
unit clear, minimum 200 mm.
•
always keep plastic packaging away from children.
•
do not install the product on an unstable or vibrating surface.
•
do not suspend the unit using the strap handle or use the strap as an anchor point.
•
do not install the product in a place where it is exposed to dust, moisture, oil or smoke.
•
take care not to drop the product when moving it.
•
When installing the product on a shelf, ensure the bottom edge of the product does not protrude.
•
Installing the product in an unusual place (e.g., where the product is exposed to a lot of dust, chemi-
cals, high temperatures, presence of moisture etc) may seriously affect its performance and lifetime.
•
to move the product, first disconnect all the cables from it.
•
If the product emits a burning smell, or smoke, remove the power cord immediately and contact dataton.
•
If the product falls, or the exterior is damaged, remove the power cord and contact dataton.
•
If there is a risk of thunderstorm or lightning strike, turn off the power and disconnect all cables.
•
ensure the front and back of unit are not blocked in any way. these are necessary for proper ventila-
tion and require a clear space of minimum 200 mm.
•
do not insert a metallic object or inflammable object into any opening of the product.
•
only use the supplied screws and brackets for mounting in 19” rack.
•
Unplug this product from the aC power supply before cleaning with a dry or very slightly damp
cloth. do not use liquid or aerosol cleaners on the product.
•
after storage in cold conditions, let the product acclimatise to normal temperature for two hours
before powering on.
Summary of Contents for Watchpax 4
Page 1: ...1 3 ...
