S4 Series Immobilisation Systems
DC Immobilisation
The wire to be immobilised is cut and rejoined via the White and White/Green wires.
The White/Red wire is not used.
Connections of the White and White/Green are not load sensitive so can be reversed.
A C Immobilisation
The wire being immobilised is ‘earthed out’ to stop the machine running.
The White tagged wire of the alarm is connected to earth.
The White/Red tagged wire is connected to the wire being immobilised.
The White/Green wire is not used.
Connections of the White and White/Red can be reversed.
Cut and insulate the White/Red wire or
remove it from the harness
Wire being immobilised
is cut
Alarm
Harness
Connect the White/Green wire to
one side of the wire which has been
cut to immobilise the machine
Connect the White wire to the other
side of the wire which has been cut to
immobilise the machine
Wire being immobilised
is not cut
Alarm
Harness
Cut and insulate the White/Green wire
or remove it from the harness
Connect white
wire to earth
Connect White/Red wire to
the wire being ‘immobilised’
Annex 4