DA-5500 Series Automatic Disc Duplicator User’s Guide V 6.1
5.2.2 Without Hard Drive Installed (DA5500-6252, DA5500-7252)
a. Go to “Write Method” and choose “Track at once”.
b. Switch to “Edit” and place your master disc into the reader. Then place ONE blank disc in the Input bin,
press [START], the duplicator will analyze the master disc, then show total xx tracks on LCD display and
finally stop at:
c. Press [MODE] switch to change the number of track that you wish to start with and then press [START]
switch to quit. After quitting, the LCD display will stop at:
d. Select end track, press [START] switch to quit.
i.e.
Master disc A: Song No.2, 4, 6, 7,8
Begin track 2, press [START] to quit. End track 2, press [START] to quit.
Begin track 4, press [START] to quit. End track 4, press [START] to quit.
Begin track 6, press [START] to quit. End track 8, press [START] to quit.
Repeat the same procedure if more tracks will be selected.
e. When selection of music tracks from master disc A in the reader is completed, press [START] again at
the duplicator will prompt you the message:
f. Press [START] switch to quit and the duplicator will start to copy the music tracks you have chosen and
displays “Pass” very quickly afterwards.
g. When complete, the master disc A will be ejected automatically.
At this moment, please do not
press [START],
simply place the second master disc in to reader and run the same procedures again to
gather more music tracks from different master discs.
h. When all selection of music tracks is completed, press [START] again at
i. The duplicator will prompt you the message:
Press [MODE] to switch to Yes and press [START].
9
Finalize
[+]
No
[
Quit
]
Begin track
[+] 0 [
Quit
]
End track
[+] 0 [
Quit
]
Begin track
[+] 0 [
Quit
]
Begin track
[+] 0 [
Quit
]
Finalize
[+]
No
[
Quit
]
