Datavan Pyramid 150, User Manual

 2

CHAPTER 0    SAFETY INSTRUCTIONS & USER’S NOTICE 

Electrical safety 

1.  To prevent electrical shock hazard, disconnect the power cable from the electrical outlet 

before relocating the system. 

2.  When adding or removing devices to or from the system, please ensure all device power 

cords are unplugged before the signal cables are connected. 

3.  Make sure the voltage of the power source conforms within the permitted range before 

connecting the equipment to the power outlet. If you are not sure of the electricity 
voltage that you are using, contact your local electricity company. 

4.  Place the power cord in such a way that it cannot step on. Do not place anything over 

the power cord. 

5.  Always unplug the power cord before inserting any add-on card module. 
6.  Never pour any liquid into the opening as this could cause damage or electrical shock. 
7.  If the power supply is broken, do not try to fix it by yourself. Contact a qualified service 

technician or your retailer. 

Operation safety 

1.  Before installing any device into the system, carefully read all documents that come with 

the package.  

2.  Keep this User’s Manual for future reference. 
3.  Keep this equipment away from humidity and dust. 
4.  Place the equipment on a steady flat surface before setting it up. 
5.  If any of the following situations arise, have the equipment checked by qualified service 

technician: 

The power cord or plug is damaged 

Liquid has penetrated into the equipment 

The equipment has been exposed to moisture 

The equipment is not working well or does not work as described in the 

User’s Manual 

The equipment has been dropped and damaged 

The equipment has obvious signs of breakage

6.  The openings on the housing are for air ventilation and to protect the equipment from 

overheating. DO NOT COVER THESE OPENINGS. 

7.  DO NOT LEAVE THIS EQUIPMENT IN A NON-AIRCONDITIONED ENVIRONMENT 

WHERE THE STORAGE TEMPERATURE MAY GO ABOVE 60ºC (140ºF) AS THIS 
CAN DAMAGE THE EQUIPMENT. 

8.  All cautions and warnings on the equipment should be noted. 

CAUTION 

The technical descriptions and specifications of the product are subject to 

change without notice. 

For safety reasons, gloves should be worn when assembling the product. 

There is a danger of explosion if the battery is incorrectly replaced. Replace 

only with the same or equivalent type of battery recommended by the 

manufacturer. Dispose used batteries according to the manufacturer’s 

instructions.