50
Step 4. Please go back to the “system” menu
and then click the
“Reboot” button
. Finally, please click the “Apply” button
again and the new setting will be effective.
Slice Split Enable: This function is advanced function and the
default value for this function is OFF. This option is used for
users to turn on/turn off the slice split function. Please turn on
this option only when the slice split function is a must for the
video decoder. This option helps users to reduce a little network
latency. However, it is not recommended to turn on this option
in normal situation. Please see following steps for setting the
Slice Split Enable function.
Step 1. Please click the On/Off option of the Slice Split Enable.
Step 2. After the On or Off is selected, please press the Apply button
on the bottom of the interface and then the On/Off of the Slice
Split function of the BC-50 video is set successfully.
Step 3. Please go back to the “system” menu
and then click the
“Reboot” button
. Finally, please click the “Apply” button
again and the new setting will be effective.
Split Mode: This option allows users to choose two split modes
including Fixed Blocks and Fixed Bytes. Those two split modes
bring users similar outcomes. So, it depends on users for
choosing the split mode. Please follow following steps for
setting the split mode for the BC-50 video.
Summary of Contents for BC-50
