68
“Setting” option. After that, please select the “VISCA Addr” option by
the Down button
and the next option button
. And then, please
modify the number of VISCA address to be the same as the one in the
homepage control interface by the Down button
and the next
option button
.
Step 6. After that, users can control the BC-50 by the VISCA commands
by related PTZ camera control softwares/hardwares. For example, if the
VISCA addresses in the BC-50 homepage control interface and the
“VISCA addr” of the MENU are set to be 1. Then the VISCA command
format “Tele (Standard) 8x 01 04 07 02 FF” will be “Tele (Standard) 81
01 04 07 02 FF”. The x means the VISCA address 1.
RTMP Setting
:
The RTMP setting is used for users to set the
RTMP streaming related parameters. For the step by step
instruction for the RTMP streaming, please refer to the section
“6.7. How to Live-Stream BC-50’s Video on Live-Streaming
Platform-Take Facebook as an Example”.
RTSP Auth: The RTSP Auth is used for users to set the RTSP
authority. Please follow following steps for setting the RTSP
Authority to On.
Step 1. Please click the “On” option of the RTSP Auth option.
Summary of Contents for BC-50
