76
Step 3. Please go back to the “system” menu
and then click the
“Reboot” button
. Finally, please click the “Apply” button
again and the new setting will be effective.
Multicast: Multicast option is used for users to turn on/off the
multicast function. Multicast is group communication
where data transmission is addressed to a group of destination
computers simultaneously.
Address: This option is the multicast address. It is a default
value.
Port: This is the port for the multicast. It is a default value.
Please follow following steps for setting the Multicast option.
Step1. Please set the Multicast setting to “On”.
Step 2. After the “On” option for the Multicast is selected, please press
the Apply button
on the bottom of the interface to activate the
Multicast option.
Summary of Contents for BC-50
