26
Note:
Recording is started in an empty bin. A clip is automatically started at
the beginning of recording to the bin. A clip can never be inserted in between
other clips already in the bin. Marking or Pausing a recording forces clip
numbers to be incremented, each clip is written to the current bin.
6.14 Stop a recording before powering off
It is best to stop a recording session before turning the DN-60A’s power off,
otherwise the whole recording or part of it may be lost.
6.15 Power on auto record
When this option is enabled and the unit is powered on the DN-60A will
attempt to begin recording immediately to the current bin using the latest
stored settings for source, file type etc.
NOTE:
The IEEE-1394 output signal on the camera/source must match the
DN-60A input Signal Type for the recording to start. If the DN-60A or source
do not match then the DN-60A will stay at 00:00:00:00.
6.16 Time Lapse Recording
In this Record Set Up option a DV recording can be set up using the following
flexible settings.
Select
SET TIMELAPSE
and press in the Menu Navigation Button.
Set the
Interval minutes
value between 0 and 59 minutes.
Set the
Interval seconds
value between 0 and 59 seconds.
Set the
Frames to record
value between 0 and 15 Frames.
Once set select
TIMELAPSE ON
and press in the Menu Navigation Button.
Now exit to the Main menu and choose
RECORD MODE
. Select an empty bin
using the folder icon and then select the
RECORD
option. Press in the Menu
Navigation Button and if the connected camera is live then the recording will
start. Ensure the Camera is supplying the DN-60A with DV25, DVCPro25 or
DVCPro50.
Summary of Contents for DN-60A
Page 1: ...1 ...
Page 42: ...42 Service and Support ...