HD / SD Recorder HDR-70
6
Product Overview
The Datavideo HDR-70 is a hard drive based
video recorder with removable hard drive
enclosure. The HDR-70 can be used as a
desktop stand alone recorder in the studio or
on location.
Record from Standard or High Definition SDI
video equipment and use the convenient SDI
loop through / pass through for record
monitoring. The unit provides SD or HD
MPEG-II MXF or MOV files which are
compatible with a wide range of HD Non
Linear Editing (NLE) and play out solutions.
Several choices of video sampling and bit
rates are available depending on your
preference.
HD-SDI Compatible formats
1080p 23.98 / 24 + 1080i 50 / 59.94 / 60 +
720p 50 / 59.94 / 60
I-Frame only
= 4:2:2 sampling either at
100Mbps or 125Mbps
Long GOP
= 4:2:2 sampling either at 35Mbps
or 65Mbps or 100Mbps
Long GOP = 4:2:0 sampling at 10Mbps or
25Mbps
SDI Compatible formats
NTSC 480i or PAL 576i
I-Frame only
= 4:2:2 sampling either at
25Mbps or 50Mbps
Long GOP
= 4:2:2 sampling either at 15Mbps
or 30Mbps or 50Mbps
Long GOP = 4:2:0 sampling either at 8Mbps
Playback of recorded tracks is from SDI and
HDMI outputs. Device control is possible via
the front panel transport keys or RS-232 or
using a simple GPI trigger.
Once the recording session is finished, simply
eject the removable drive enclosure. The drive
enclosure can then be connected via a USB
2.0 port to a PC or Mac based HD Non Linear
Editing system. You then copy the required
video as files across to your HD NLE media
drive. As USB 2.0 provides power to the drive
enclosure no extra power supply is required,
so it is also perfect for laptop use in the field.
The recorder can also run on 12V DC power
so it is not limited studio use and can be used
in an OB van set up too.
That’s Datavideo, sharing the value!
Features
Backlit LCD display and soft keys for
track confirmation and menu navigation.
Normal VTR type transport keys for
Play/Pause, Stop, Record, Fast Forward
and Reverse.
LCD Status screen confirms incoming
signal and unit settings.
Removable HE-1 drive enclosure for
standard SATA 2.5” laptop drives.
Front panel 3.5mm stereo audio jack
point and volume control for convenient
audio monitoring.
LED based Audio Peak meter for audio
confidence.
Input connections:
SDI / HD-SDI BNC Input with loop
through
Analogue or 8 channel SDI audio input
–
analogue audio via XLR inputs.
Output connections:
SDI / HD-SDI BNC output
HDMI output
File formats supported:
.MOV, .MXF
NTFS system allows large files to be
created during the record process.
External Time code input and loop
through.
Genlock and black burst support.
RS-232 and GPI Control interface.
12V DC Operation allowing OB Van
compatibility.
