19
Intercom & Monitor Control Panel
XLR Microphone Socket
Combined XLR / ¼” (6.3mm) Jack Microphone Input for either a Condenser or
Dynamic Gooseneck Microphone. XLR supports Condenser Microphones ¼” (6.3mm)
Jack supports Dynamic.
MUTE Button
Mutes all communication from the base station or any channel.
N.B. If any channel uses the CALL button the paging tone will still sound even
when the MUTE button is active.
Channel Buttons 1~5
Opens communication with individual channels. More than 1 channel can be active at
any given time, active channels are illuminated red.
All active channels will hear any communication from the operator or from any other
active channel.
The buttons will also indicate if any channel is paging, the paging channel will flash in
orange until the page is answered.
ALL Button
Opens communication with all channels. All channels will hear communication from
the operator, or from any other channel using the TALK button.
1
2
3
6
7
8
9
4
5
Intercom Function
1. XLR Microphone Socket
2. MUTE
Button
3. 1~5 & ALL Channel Buttons
4. Volume
Control
5. Built-In
Speaker
Monitor Function
6. Source
Select
7. Aspect Ratio & PIP Button
8. Menu Navigation Buttons
9. Volume Control & Audio Meter
