9
TALLY OUT
Tally out socket. This supplies tally light information to the Datavideo ITC-50 system.
HD- SDI OUT
4:2:2 SDI Video data supports SMPTE 292M standard at 1.5G Mbps.
SDI transfers professional level video signals and it’s can connect to long distance
transmission systems.
MONITOR HDMI IN
MONITOR HDMI IN is an external source for the 17.3" LCD monitor (with LED backlit)
input. This function is not auto sense - for more information, see
Source Select
Buttons
AC IN
AC in socket connect the supplied 100~240V 5A PSU to this socket.
POWER
Switches the power On / Off.
MONITOR F/W Upgrade
Socket is for monitor F/W upgrade.
AUDIO OUT
Supports two channels XLR Balanced Audio output.
TO BELTPACK (For Intercom)
Channel Input / Output XLR Sockets
Each of the 5 channels has an XLR connector that carries bi-directional signals
between the ITC-50 and ITC-100SL. All connections are contained within the one
cable.
AUDIO IN
The HS-2000L supports four XLR Balanced Audio Input channels.
There are two kinds of switches under
AUDIO IN:
LINE/MIC
switch is used to set the audio as LINE in or MIC in. When LINE in is
selected please also set the
48V ON/OFF
switch to
OFF
in order to prevent burn-out
damage to the circuit.
The
48V ON/OFF
switch is for phantom power. If you want to use MIC in, please set
the
LINE/MIC
switch first, and then if using a Condenser microphone turn ON the
48V
ON/OFF
switch. If you wish to use a Dynamic microphone please turn OFF the
48V
ON/OFF
switch.
