18
External Tally LED Socket
An external tally LED (TD-2/3) can be connected to
the ITC-300SL via a GPI cable. This enables the tally
light to be positioned in a more visible place, such
as on top of the camera. When the channel is LIVE,
the LED will be RED, and when the channel is CUED,
the LED will be GREEN.
NOTE: The Tally LED on the ITC-300SL will continue
to operate as normal even after a TD-2/3 has been
connected.
Bi-Color Tally LED
Illuminates RED when the channel is LIVE and
GREEN when the channel is CUED.
Device Pairing Procedure
The Pairing function is designed to configure channel assignment of the ITC-300
intercom system to the connected belt packs. You will only be allowed to assign one
powered ON belt pack to one channel of the ITC-300 intercom system at a time. Power
of the rest of the belt packs should be turned OFF.
Note: The pairs are system to belt pack only.
ITC-300 Base Unit
ITC-300SL Belt Pack
Summary of Contents for ITC300HP2K
