11
8
MIC Input
–
6.3 mm XLR
Connect balanced audio to the
MIC inputs. Details of operation
are summarized below:
CH 1 (L)
CH 2 (R) States
MIC1
MIC2
MIC 1(L) and MIC 2(R) are respectively connected to left (CH 1)
and right (CH 2) channels.
MIC1
NC*
When MIC 1 is connected to the left channel (CH 1) and MIC 2 is
not connected to the right channel (CH 2), the right channel (CH 2)
switch will replicate MIC 1 signal onto the right channel (CH 2)
thus both channels are MIC 1 input signals.
NC*
MIC2
When no MIC signal is connected to the left channel (CH 1) and
only MIC 2 is connected to the right channel (CH 2), MIC 2 signal
will not be replicated onto the left channel (CH 1) which will thus
be grounded.
NC*
NC*
When no MIC is connected to the two channels, the left channel
(CH 1) switch will ground the left channel (CH 1) to prevent noise
from being generated.
*NC
–
Not Connected
Streaming
9
Stream OUT
The stream port allows you to
broadcast your video online via
various streaming protocols
such as the RTMP. See
5 Video Streaming and
Recording
descriptions.
Control
10
DVIP/Control
This port allows you to connect
to a Datavideo PTZ camera with
a DVIP port by an RJ-45 Ethernet
cable in order to control the
connected camera by your
KMU-300.
CG PREVIEW