58
7.
Enter the
Stream URL (rtmp://a.rtmp.youtube.com/live2)
obtained from the
Youtube
Live Streaming
page into the
RTMP URL
field.
8.
Enter the
Stream key
obtained from the
Youtube Live Streaming
page into the
Stream
Name
field.
9.
As required by the live streaming channel, enter your Youtube account name and
password into the
Account
and
Password
fields.
10.
Click the
Start Stream
button to start streaming the live video to the
Youtube Live
. You
should also see an
RTMP URL
generated.
11.
At this point, you should be able to view your stream video on Youtube.
12.
To stop live streaming, simply click the
Stop Stream
button.
SRT
When setting up an SRT stream on NVS-31 MARK IV of the KMU-300, you can configure it as
an SRT source encoder (caller mode) or an SRT destination decoder (listener mode).
To establish an SRT link between the source and destination devices, ensure that one device
is a Listener and the other is a Caller. The device you set as the caller or listener is entirely
arbitrary.
To access the device’s SRT settings, log in to the web UI, select the
“Operation Mode”
tab,
then click the
“Stream”
button to open the stream settings page.
Now, follow the steps below to set up the SRT traffic:
1.
Select
SRT
from
Stream Type
drop-down menu.
Please select “Streaming One” or
“Streaming Two”. After that, please select “Enable” from the Encoder Source drop
-down
menu. Please refer to
for setting the main and sub encoders.
2.
Please select
SRT
from the
Stream Type
drop-down menu.
