61
5.4 Stream and Record Buttons
The
RECORD
,
STREAM
,
VERTICAL
and
BITRATE
buttons on the front panel of the KMU-300
give the user certain controls of the record and
stream functions. In this section, we will cover
operations of these four buttons in detail.
RECORD and STREAM Button LED behaviors are listed in the table below:
RECORD Button
STREAM Button
Solid White
Record function in idle state
Stream function in idle state
Blinking Red
Record function is activating
or resetting
Stream function is activating or
resetting
Solid Red
Record function activated
Stream function activated
Record Button
Press the
RECORD
button to start/stop recording.
Start recording
When idle, the
RECORD
button is solid white.
Press and hold the
RECORD
button for approximately 2 seconds.
When the record function is activating, the
RECORD
button turns from solid white,
then blinking red and finally to solid red.
When the
RECORD
button is solid red, this indicates that the record function has
been successfully activated.
Stop recording
While recording, the
RECORD
button is solid red.
Press and hold the
RECORD
button for approximately 2 seconds.
When the record function is terminating, the
RECORD
button turns from solid red,
then blinking red and finally to solid white.
When the
RECORD
button is solid white, this indicates that the record function has
been successfully terminated.
Stream Button
Press the
STREAM
button to start/stop streaming.
Start streaming
When idle, the
STREAM
button is solid white.
Press and hold the
STREAM
button for approximately 2 seconds.
