background image

 

 

 

Warnings and Precautions 

 

1.

 

Read all of these warnings and save them for later reference. 

2.

 

Follow all warnings and instructions marked on this unit. 

3.

 

Unplug this unit from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use 

a damp cloth for cleaning. 

4.

 

Do not use this unit in or near water.

 

 

5.

 

Do not place this unit on an unstable cart, stand, or table. The unit may fall, causing serious 

damage. 

6.

 

Slots and openings on the cabinet top, back, and bottom are provided for ventilation. To ensure 

safe and reliable operation of this unit, and to protect it from overheating, do not block or 

cover these openings. Do not place this unit on a bed, sofa, rug, or similar surface, as the 

ventilation openings on the bottom of the cabinet will be blocked. This unit should never be 

placed near or over a heat register or radiator. This unit should not be placed in a built-in 

installation unless proper ventilation is provided. 

7.

 

This product should only be operated from the type of power source indicated on the marking 

label of the AC adapter. If you are not sure of the type of power available, consult your 

Datavideo dealer or your local power company. 

8.

 

Do not allow anything to rest on the power cord. Do not locate this unit where the power cord 

will be walked on, rolled over, or otherwise stressed. 

9.

 

If an extension cord must be used with this unit, make sure that the total of the ampere ratings 

on the products plugged into the extension cord do not exceed the extension cord rating. 

10.

 

Make sure that the total amperes of all the units that are plugged into a single wall outlet do 

not exceed 15 amperes. 

11.

 

Never push objects of any kind into this unit through the cabinet ventilation slots, as they may 

touch dangerous voltage points or short out parts that could result in risk of fire or electric 

shock. Never spill liquid of any kind onto or into this unit. 

12.

 

Except as specifically explained elsewhere in this manual, do not attempt to service this 

product yourself. Opening or removing covers that are marked “Do Not Remove” may expose 

you to dangerous voltage points or other risks, and will void your warranty. Refer all service 

issues to qualified service personnel. 

13.

 

Unplug this product from the wall outlet and refer to qualified service personnel under the 

following conditions: 

a.

 

When the power cord is damaged or frayed; 

b.

 

When liquid has spilled into the unit; 

c.

 

When the product has been exposed to rain or water;  

d.

 

When the product does not operate normally under normal operating conditions. 

Adjust only those controls that are covered by the operating instructions in this manual; 

improper adjustment of other controls may result in damage to the unit and may often 

require extensive work by a qualified technician to restore the unit to normal operation; 

e.

 

When the product has been dropped or the cabinet has been damaged; 

f. 

When the product exhibits a distinct change in performance, indicating a need for 

service.

 

 
 
 
 
 
 
 
 

 

Summary of Contents for MCU-100J

















Reviews: