17
Double click the network adapter that connects your PC or laptop to the
network.
Click the “
Properties
” button.
Select “
Internet Protocol Version 4 (TCP/IPv4)
” option and click the
“
Properties
” button.
Check the “
Obtain an IP address automatically
” option.
Enter IPv4 settings:
-
IP Address: 192.168.1.2
-
Subnet Mask: 255.255.255.0 (System default is 255.255.255.0)
-
Default Gateway: Not required for one-to-one connection.
Note: Please write down the IPv4 address previously entered as it may be
needed after you are done with streaming or recording.
The NVS-33 should now be connected with an IP address of 192.168.1.60.
If the NVS-33 still cannot connect, simply restore the NVS-33 to the factory
defaults.
-
Turn off the NVS-33.
-
Push the
RECORD and STREAM
buttons simultaneously while turning
on the NVS-33’s power.
-
Wait for about five seconds and release the button push as soon as you
see the
RECORD
and
STREAM
button LEDs light up.
-
Make sure no other devices are connected to the LAN (wired or
wireless) because this may result in IP conflicts.
Login the NVS-33 via a web browser.
Summary of Contents for NVS-33
Page 1: ...NVS 33...
Page 56: ...56 5 Dimensions All measurements in millimeters mm...
