5.0 S.E.G. MODE
5.0.1. Go from TITLER MODE to S.E.G.MODE.
S.E.G. MODE
1. PROJECT .
2. ANIMATION SET UP.
3. ACTIVE .
Press the "MODE" key to exit "TITLER MODE" and enter "S.E.G. MODE". In "S.E.G.
MODE" you will see the following menu on screen. If you do not see this menu,
press the "MODE" key until this screen appears:
13
4.4.4 Make titles using your custom icons.
Press the "SUB MODE" key to exit Custom Icons Sub-Mode and return to "Titler
Mode" menu. Press the " 1 " key to enter Edit Sub-Mode. Move the cursor to a
position where you want to place a custom icon. Press and hold the "INNER
CODE" key (same as the "ALT" key) + the "SHIFT" key and then the number
(01~36) of the custom icon you want.
Note: Custom Icons is not available for playing back with "WIPE" effect in
Active Sub-Mode.
< ICON LIBRARY>
01 02 03 04 05 06
07 08 09 10 11 12
*NEXT ICON= "NEXT" KEY
*MATRIX MAP= "OUT" KEY
4.4..3 View your custom icon library.
After generating a few custom icons or characters, press the "NEXT" key to view
your new icon library. The first page of the library will appear on screen:
This screen shows the first 12 icons (01-12) that you customized. You can create up to
36 individual custom icons or characters. There are two more screens that show icons
13~24 and icons 25-36. To see these screens, press the "NEXT" key. To go back to the
last individual icon you were working on in the Matrix Map, press the "OUT" key.
