27
Press the "IN" key to answer "YES". The only time you would press the "OUT" key to
answer "NO" is when you want to re-edit an existing scene sequence stored in the
Editor's current memory. After you press the "IN" or "OUT" key, the screen will revert to
the Cut Sub Mode.
6.2.3 Press the "RESET" key (same as Background "COLOR" key) to rewind source
(camcorder) tape and reset tape counter. This screen will appear:
REWIND SOURCE TAPE
AND
RESET SOURCE COUNTER?
YES= "IN" KEY
NO= "OUT" KEY
6.2.2 Before editing a new tape, it is usually
desirable to delete all edit information
previously stored in the Editor's memory.
Press the "DELETE" key to bring up this
screen:
SOURCE : A
DELETE ALL SCENES ?
YES = " IN " KEY
NO= " OUT " KEY
6.2 CUT SUB-MODE
+0:12:36:17
OUT
SOURCE: A
SCENE NO.: 01
a) If you wish to begin editing at the start of your source (camcorder) tape,
press the "IN" key to answer "YES". When you press the "IN" key, the Editor will
automatically rewind your source tape and reset the source tape counter
to "+0:00:00:00".
b) If you wish to begin editing in the middle of your source (camcorder) tape,
press the "OUT" key to answer "NO". You must then wind the source tape
yourself (using the Editor's "CAM" function keys) to the point where you wish
to begin editing. NOTE: if you start editing in the middle of the tape, the
counter number at the start of the first scene will NOT be "00:00:00:00".
6.2.1 From the "Editor Mode" menu, press
the "2" key to enter Cut Sub Mode.
This screen will appear:
+0:23:36:08
