The letter indicates Source A or B. The number indicates EDL ("Tape 1", "TAPE 2",
"TAPE 3" or "TAPE 4")
36
i. Move cursor to character "A" position on "SR" column and sequence row
where you want to insert the Source B scene.
ii. Press the "IN" key. "A" will change to "B" on screen, indicating you have
selected Source B.
iii. Move cursor to right at numeric (1~4) position on "SR" column then Press
the "IN" or OUT" key that corresponds to the EDL tape number you want.
iv. Move cursor to the "SN" column and enter the new scene number you
want from the Source B EDL.
a) Selecting Source A. The default source setting in the Project Sub-Mode is
"A.1" (Source A will be edited according to the EDL you stored in memory as
"Tape 1"). To select "Tape 2", "Tape 3" or "Tape 4" (instead of "Tape 1") as the
EDL for Source A:
i. Move cursor to the numeric (1~4) position on "SR" column.
ii. Press the "IN" or "OUT" key that corresponds to the EDL tape number you
want. The "SR" indicator on screen will change from "A.1" to "A.2", "A.3" or
"A.4".
b) Inserting scenes form Source B. Note: before you can insert scenes from
Source B, you must have created an EDL for Source B. If the EDL for Source A
is "Tape 1", the EDL for Source B must be "Tape 2", "Tape 3" or "Tape 4". Note
also (IMPORTANT): you will need to write down which scene numbers from
the source B EDL you want to insert. To insert a scene from Source B:
SEQUENCE
SOURCE/TAPE NO.
SCENE NO.
CALIBRATION
SPEED
TRANSITION EFFECT
START POINT
END POINT
001 A.1 NO 0030910
SQ SR SN CAL. DURATION
002
02 NO 0061212
B.
2
IN +0010612 CUT SP 1
OUT +0041522 CUT SP 1
IN +0031001 CUT SP 1
SP
OUT +0 052002 CUT
1
003 A.1 03 NO 0050514
IN +01345 05 CUT SP 1
OUT +0185019 CUT SP 1
END: 010, TOTAL LENGTH : 0242915
01
LAST SEQUENCE NO.
c) Adding A/B Roll effects to the edited sequence.
Move cursor along the "EFFECT" column at the "OUT" line to the scene where
you want to add the A/B Roll effect. Then Press the "A/B ROLL" key (same as
the "SIZE" key). The "A/B ROLL" words should appear on the "OUT" line. The
words of AB ROLL and Effect, Speed in the next sequence at "IN" line will be
changed to yellow color as shown below:
