5. MODE key:
Selects the function mode (Titler, S.E.G., or Editor).
6
.
AUDIO FADE Key:
Activates T-Bar for manual audio fades. When LED is lit, audio
fade is active.
7
.
VIDEO FADE Key:
Activates T-Bar for manual video fades. When LED is lit, video
fade is active.
8. MIX Key:
Activates T-Bar for manual A/B dissolves. When LED is lit, mixing is active.
Note: if you have two non-synchronous video sources (as you almost certainly are),
this LED must be OFF.
9
.
T-Bar Control:
Lets you manually control audio/video fades and A/B dissolves. For
audio/video fades, T-bar's "up" position means "IN" and the "down" means "OUT".
For A/B dissolves (synchronous source ONLY), when the source A is selected
(source "A"" LED is lit), the T-Bar's "UP" position means "Source A" and the "down"
position means "Source B".
10. Source Key:
Cuts back and forth between A and B sources. (Note: to fade
manually with non-synchronous sources, use the T-Bar to fade the first source OUT,
then press the SOURCE key to switch sources, then use the T-Bar again to fade
the second source IN.)
11. B/W key
: Creates a black and white effect for source video. This key cycles
through four choices:
* Source A only * Source B only * Both Sources A + B * Bypass (no B/W effect
at all).
12. Color Processor Key
: Enables R-G-B CORRECTOR Key, and activates VIDEO
GAIN and COLOR controls. When LED is lit, color processing is active. SE-200 will
memorize the status ("ON" or "OFF") of processor.
13. R-G-B Corrector Key
: Actives joystick for R-G-B color correction. When LED is lit,
joystick is active. Note: color processing must be active first, before R-G-B
correction can be activated.
14. R-G-B Joystick
: Controls R-G-B color correction/white balance of video output.
(Active only when both R-G-B CORRECTION and COLOR PROCESSOR LEDs are lit).
15. VIDEO GAIN Control
: Adjusts the luminance level of video output (active only
when COLOR PROCESSOR LED is lit).
16. VIDEO COLOR Control
: Adjusts color saturation of video output (active only
when COLOR PROCESSOR LED is lit).
17. AUDIO SOURCE A Control:
Adjusts the audio volume of Source A.
18. AUDIO SOURCE B Control:
Adjusts the audio volume of Source B.
19. AUDIO MUSIC Control:
Adjusts the audio volume of any background music
source (such as CD player)
20. AUDIO LEVEL Indicator:
LED display indicates the volume of complete audio
output mix.
21. Power on/off Switch:
Turns power on and off when power supply (AC Adaptor)
is properly connected.
3
3. Keypad
for the SE-200's Titler functions.
4. Keypad
for the SE-200's Editor functions.
