27
Stills Menu
The Stills menu allows the user to Grab, Store and Load Uncompressed stills with the SE-3000 Mixer. This
feature is generally used after the
Freeze
menu function, see page 26.
The Main unit has two frame stores to which stills can be loaded, and the unit has enough storage space for
about 100 uncompressed stills.
It is best to have Dual Mode 1 or Dual Mode 2 Multi Image Preview on the monitor(s) so that you can see
your Program output and any captured still images. See also Multi Image Preview on page 17.
Example:
Press the
STILLS
button in the
Menus
button group of the SE-3000 Control Panel / Keyboard.
Now look at the Touch Screen Menu Panel.
Grabbing & Saving a Still to memory
The Grab & Save option allows new Still Images to be created by grabbing & saving the
current Program
video frame image
to one of the two internal stills buffers in the SE-3000.
−
The P
rogram output is grabbed to a Stills buffer
(Still 1 or 2) by pressing the 'Grab Still' option.
−
The user can then look at the Multi Image
Preview and decide if this Still should be saved.
−
To Save a Still from the currently selected Stills buffer, the user should select a Stills number that has
not been used yet, and tap on the
'Save Still'
option.
−
The save process takes about 15 seconds, after which the new thumbnail picture will be shown
within the Stills display under the chosen stills number.
−
In addition, a name or description for the Still can be added using the 'Name' option.
