28
Loading an existing Still from memory
The Still Load Menu allows stills already stored in the SE-3000 to be loaded to either the Still 1 or Still 2
buffer.
The Still menu screen (shown above) shows thumbnail pictures of up to 16 saved stills at a time. If there are
more than 16 stills stored in the SE-3000 then the Arrow Up and Down buttons on the right can be used to
page up or down through the saved stills. The stills are shown in numerical order, and any numbers not used
are not shown. The currently selected still is shown with a Yellow border.
To load a still, the user can either tap on the appropriate thumbnail picture, or select it by entering the Stills
number and then tapping the
'Load Still'
option.
The selected still will be loaded into the currently highlighted stills buffer. In the above example still buffer 2
has been loaded with selected still number 3.
Deleting a saved Still from memory
To delete a saved still, tap on the thumbnail picture of the still that is no longer required. A yellow box will be
displayed around the selected thumbnail. Now tap on the Delete option in the yellow menu area. Another
Delete option is then shown at the bottom of the Touch Screen. Tapping on this second Delete option
confirms that the selected still should be deleted from the SE-3000 memory.
Note:
The deleted still is kept in the current Still 1 or 2 buffer until another still image is selected or grabbed
to occupy this buffer.
