31
Loading a previously saved User Set Up
Example:
To load a previously saved mixer Set Up simply press the
LOAD
button in the
Numeric Keypad
area
of the SE-3000 Control Panel / Keyboard. Now
enter the number of the required set up
and then
press
ENTER
on this Keypad.
If the User set up was saved to one of the first 8 memory slots then you could press the relevant number in
the
USER / SHOTS BOX
area of the SE-3000 Control Panel / Keyboard.
A third way to load a saved Set Up is to press the
USER
button in the Menus area of the SE-3000 Control
Panel / Keyboard. Now look at the Touch Screen Menu Panel.
The User Memories screen shows icons for up to
16 user memory slots at a time. The current or
selected User slot will have a yellow border.
At the bottom of the screen in the left hand corner
you can
Load Memory
from the currently selected
memory slot.
Deleting a User Set Up
To Delete an existing User Memory slot or Set Up select the Memory position using the Touch Screen Menu
Panel. Then tap on the 'Delete Memory' option in the Yellow menu area. Confirm deletion of the selected
User number by tapping on Delete at the bottom of the screen.
Flex™ Overview
The Flex™ output allows the user to show a variety of sources at the same time these can then be fed as
one combined image to the SE-3000 Program, Preview and or Auxiliary outputs.
The Flex™ output could be as simple as one background image and a smaller second source image to
make a basic PIP or Picture in Picture.
Alternatively it could be a lot more complex with a third image source making a second PIP window. You also
have the ability to place a user defined colour border around the smaller PIP windows. You can re-size, crop,
rotate and position the DVE / PIP windows in almost any manner that you wish.
Add to this the linear keying options for adding a
CG-350 text/graphics overlay
and your creative options
are only limited by your imagination and skill with the SE-3000.
