36
Windows PC Users
MAC Users
6.2.3 Key 1 & Key 2 PRIORITY Key Function
The
PRIORITY
button toggles the layer order or priority of
Key 1
&
Key 2
.
Windows PC Users
MAC Users
When Key 1 and Key 2 are both active in Preview (or Program), they may overlap each other on the screen.
Using the Priority Button you can change the order of these keyers. The button acts in a toggle on/off way,
i.e. Key1 over Key2 or Key2 over Key1.
NOTE
: It is best to check and change the Priority of Key 1 and Key 2 when they are initially active on the
Preview monitor/output.
6.3
Transition Effects
The SE-1200 MU provides the user with options for cutting or transitioning between the selected preset
and program video sources.
6.3.1 CUTTING between Sources
Cutting between sources is a clean switch from the current Program video to the next source image. This
can be achieved in two ways:
1.
Program row buttons
Each button press on the Program row will cause an instant clean cut to the selected source. (Active
selection is backlit red)
2.
Cut button
Selecting the next source on the lower
Preset row
of buttons and then pressing the
Cut
button.
