6
What’s in the box?
1 X AC Adaptor 12V / 500mA
1 X VS-100
1 X VS-100 Quick Start Guide
Introduction
The VS-100 is a small digital, self calibrating, inexpensive, accurate,
field or studio tool used to monitor and analyze SD/HD SDI video
signals and their embedded audio levels. Use the VS-100 as a
Waveform Monitor to match black background levels when keying, as a
Vectorscope to make sure of the right color presence. Use the Parade
mode to check on color balance and the Histogram display to make
sure blacks or whites are not clipped. Use the VS-100 to compare and
match multiple cameras.
Features
Analyses SD/HD SDI video input with up to 8 channels of audio
Support 5 modes: Waveform monitor / Vector scope / Parade /
Histogram / Video pass-through for full monitor view.
Video in thumbnail form displayed at all times.
Analyses the whole frame or any either field.
Uses an external SDI or HDMI standard monitor to display the
output. The monitor must support 720p50/59.9/60
The SDI output can also be used as a input loop-through.
Small size. Can be camera mounted.
Connector on the side to support future accessories and firmware
upgrades.
