First use – Remote starts in Wired Mode
When first removed from the retail package the WR-500 remote is
already in
wired mode
. When a button is pressed a
RED LED
will
flash. The WR-500 can be switched to Bluetooth mode if required.
In wired mode, the remote needs to be physically cabled to the
tablet it is controlling. A four pole jack to jack plug cable is provided
with this remote.
One end of the cable fits into the tablet’s headset socket.
The
other end plugs into the jack socket on the WR-500 remote.
NOTE:
When using this remote in wired mode the
DV Prompter
app
should also be set to
Wired – WR-500 in the Remote menu
option.
