14
Pressing the “
T
” knob again will select the second digit (steps of one MHz,) of the
frequency
adjustment
function, this is depicted in
figure 3.5
with an underlined number “
0
”:
Figure 3.5. Selection of the 1 MHz steps digit of the frequency change function
indicated by an underlined number 0.
Selecting and deselecting the digit is done with the “
” button, selecting the other digits is
possible pressing the “
T
” knob for the next digit (or function) or pressing the “
▲
” knob for the
former digit (or function).
For example, when starting from the clean menu screen of
figure 3.2
we have to press the “
T
”
button six times or the “
▲
” knob two times to select the
mem
(memory)
function as is shown in
figure 3.6
.
Figure 3.6. Selection of the mem (= memory) function.
We have to press the select button “
” to enter the
mem
submenu. This submenu will be
explained in
paragraph 3.6.5
.
To select the
info
function from the menu screen of
figure 3.3
with [EXIT] selected we have to
press the “
▲
” knob one time or the “
T
” button seven times. The selected
info
submenu is
shown in
figure 3.7
:
Figure 3.7. Selection of the info function.
Pressing the select button “
” now brings us into the
info
submenu. This submenu will be
explained in
paragraph 3.6.6.
The next subparagraphs will describe the control and monitoring functions in the menu in detail
with a step by step approach.