17
Recalling a frequency from a preset
Step 1.
From the
receive
mode first enter the
menu
function by pressing the “
”
button a few seconds.
Step 2.
Press the “
▲
” button twice so that the
mem
submenu is selected (
figure 3.7
).
Step 3.
Hit the “
” select button and the memory submenu is shown (
figure 3.9
).
Step 4.
Select the
rcl
(recall) function by pressing the “
▲
” button once (
figure 3.12
).
Figure 3.12. Selecting the recall function in the mem submenu.
Step 5.
Press the “
” button to enter the recall preset
menu (
figure 3.13
).
Figure 3.13. The recall preset display.
Step 6.
Proceed with selecting the preset number (in
figure 3.13
indicated with the
underlined
1
) by using the “
T
” or “
▲
” buttons. Up to six preset frequencies can
be selected.
Step 7.
Use the “
” button to confirm your selection of the preset number. Now the
display from
figure 3.14
will be shown for two seconds before returning to the
main menu of
figure 3.2
.
Figure 3.14. Message after confirming a preset recall command.
Step 8.
Go back to the normal display of
figure 3.1
by pressing the “
” button.