DT1600 Ux xx xx
14
20180621-V0
6. Fault rectification
6.1. Fault finding
The fault finding must be carried out by trained and
authorized personnel only.
•
The green indicator is dark
→
check the mains voltage.
If the mains voltage is OK: the instrument is defective.
•
There is no output signal
→
check the input signal.
If the input signal is OK: the instrument is defective.
When the result of fault finding is that the instrument is
defective call the manufacturer service department.
6.2. Repairing
There is no user repairable part inside the instrument.
In accordance with Point
2.1.: For safety and warranty
reasons, any internal work on the instrument must be
carried out only by DATCON personnel.
