DT9102 B
6.3. Manual controls
DT9102 B can be adjusted by the membrane push-buttons
indicated by
(1)
,
(2)
, and
(3)
in the drawing.
Functions of the push-buttons during displaying time
(1) MENU button:
Enters the menu
When you push this button, the device will ask for a
password (code) in accordance with Chapter 7.1. Type in
the code (password), when the right code has been given,
it enters into the menu.
During this time the clock is
running, and the digital outputs don’t change
. If no keys
are pressed for a period of one minute, the instrument
restarts and the measurement goes on.
(2) ▲ button:
displays the firmware version. The firmware
version remains on the display as long as the button is
being pressed.
During this time the clock is running,
and the digital outputs don’t change
.
(3) ENTER button:
displays the seconds.
The seconds are refreshed on the display as long as the
button is being pressed.
20180905-V1
25
Summary of Contents for DT9102 B
