DATECS
DATECS
BLUEPAD-55 V2 USER GUIDE
Page 14 of 23
DEV SN - BLUEPAD-55 v2 serial number
USIP SN - USIP serial number
USIP VER - USIP version
ISBL VER - USIP Boot loader version
HAL VER - USIP Hardware Abstraction Layer (HAL) version
LOAD VER - Secure Boot Loader (SBL) version and name
FW VER - Firmware version and name
PROM VER - Prompts version
APPL VER - Application version and name
PKFA VER - Version of the public key used for firmware authentication
PKAA VER - Version of the public key used for application authentication
PKKA VER - Version of the public key used for manufacturing keys authentication
INFO HARDWARE
Gives information about the status of the following hardware properties:
BATT: indicates the voltage of the battery
VBUS: indicates if external power supply is plugged in
CHARGE: indicates if the battery is charging BATLOW:
identifies low battery
BTCON: shows active BLUETOOTH connection
INFO KEYS
Shows the version of the following keys:
AIK keys version
TEST DISPLAY
Performs a display test. Initially a blank screen is displayed. When OK button is pressed once,
completely black screen is displayed. When OK button is pressed twice, checkmate background is
displayed, its contrast can be changed with the UP and DOWN buttons.
To exit the test at any time the button C has to be pressed.
TEST KEYBOARD
Performs a keyboard test. At first the symbols of all the keys appear on the display. Pressing a key
makes its corresponding symbol to disappear. The test ends when all the buttons have been pressed.
TEST SCR
Performs smart card reading tests. On the display appears a menu with the supported options. To
perform a test, insert a card in the card slot and select the corresponding menu option:
1: RESET : performs card reset and returns the ATR
2: GET CHALLENGE : calls the command GET CHALLENGE and returns a random number
