Datecs
USERS MANUAL
21.06.2011
20
PROGRAMMING AND REPORTING TO PC
From the ECRs ‘OFF’ state, by pressing the key 9 you will access the state "OFF-
LINE". In mode 9 the ECR is waiting for communication – programming and
reporting from PC. The correct communication baud rate must be prior given into
PGM1 mode, table 2 field 9. For programming and reporting is used the
application Ecr Tool or its analog.
OFF-LINE
ERROR CODES AND MESSAGES
Error codes:
Error code:
Description
Solution
ERROR #01
Printing device failure
ERROR #02
Program memory failure
ERROR #03
Operational memory failure (EEPROM 24C256 failure)
ERROR #04
Fiscal memory error, bad check sum, unable to write
ERROR #05
The flash memory is not accessible
ERROR #06
Bad flash memory format
ERROR #12
Program progress error or RealTimeClock error
Service intervention is needed