UK ©2012 Datel Ltd. Combat Command is a trademark of Datel Ltd. Combat Command
is a 100% unofficial product and is NOT sponsored, endorsed or approved by SONY,
nor any games developer or publisher. PLAYSTATION and PS3 are registered
trademarks of SONY in the United States and/or other countries. The Bluetooth
word mark, figure mark, and combination mark are all trademarks of the Bluetooth
SIG. Combat Command is also marketed under the name Wireless Gaming Headset
and/or GameTalk wireless gaming headset.
FR ©2012 Datel Ltd. Combat Command est une marque déposée par Datel Ltd. Combat
Command est un produit 100% NON officiel et n'est PAS commandité ou approuvé par
SONY, ni par aucun dévelopeur ou éditeur de jeux vidéos. PLAYSTATION et PS3 sont
des marques déposées par SONY aux Etats-unis et/ou autres pays. Le nom de marque,
logo ou combinaison de logo et nom Bluetooth sont des marques déposées par
Bluetooth SIG.
DE ©2012 Datel Ltd. Combat Command ist ein Warenzeichen von Datel Ltd. Combat
Command ist ein 100% inoffizielles Produkt und ist NICHT von Sony oder anderem
Entwickler oder Verleger von Spielen unterstützt, genehmigt oder zugelassen.
PLAYSTATION und PS3 sind eingetragene Warenzeichen oder Warenzeichen von
SONY in den Vereinigten Staaten von Amerika und/oder anderen Ländern. Das
Bluetooth Wortzeichen, Bildzeichen und Kombinationszeichen sind Warenzeichen
von Bluetooth SIG .
BS002469 PS3 Combat Command wireless gaming headset manual GH
110512
COMBAT COMMAND
for/pour/für PS3®
User Guide / Guide de l’ulisateur
Bedienungsanleitung
UK/FR/DE
WIRELESS
GAMING HEADSET
2
Introduction
Congratulations on your purchase of Datel’s Combat Command™. This headset has been specifically
developed for maximum performance and comfort in the heat of gaming battle.
The headset uses genuine Bluetooth wireless technology to communicate with your PS3. Before you
can use the headset you must first charge it and then register it with your console. Please read and
follow this user guide for information on how to do this.
Safety Information
Hearing Loss
Prolonged exposure to loud volumes may result in temporary or permanent damage to your
hearing. Be careful to not set the volume level too high on your headset. Always take regular
breaks when gaming or chatting.
The Headset
Indicator Light
Used to communicate a number of functions/states.
Volume Co/-
Press (+) to increase and (-) to decrease the earpiece volume.
Function Button
Use to turn the headset on and off, pair the headset and answer/end
a call.
USB Charging Jack
Remove the rubber cover then connect this Jack to your PS3 to
charge the headset.
Speaker
High quality over-the-ear speaker for crystal clear audio.
Microphone
Noise cancelling microphone should be positioned slightly to the side
of your mouth.
Charging the Headset
The Combat Command comes with a built in Lithium-ion Polymer battery that needs to be charged
before first use.
UK
3
To charge the headset:
• Plug the USB charging cable (supplied) into any USB port on your PS3 and the other end into the
USB Charging Jack on the headset (you will need to remove the rubber cover first).
• Whilst charging, the Indicator Light will turn red.
• When charging is complete the Indicator Light will go off or flash red to alert you that the unit is
fully charged and ready to use.
Important charging advice:
• Before using the headset for the first time, be sure to charge it for at least 4 hours. Ideally, charge it
overnight (8-10hrs).
• For safety reasons, and to prevent damage to the headset, do not use the headset whilst it is
charging.
• Only use the original USB charger cable that came with the headset to charge it.
• Please recharge the Combat Command at normal room temperature.
When to recharge:
If the red light flashes during usage or when on standby, the battery is low and you should recharge
the headset as soon as possible. To avoid this happening, regularly recharge the headset between
gaming sessions.
Turning the Headset On/Off
To turn the headset on, press and hold the Function Button for 5 seconds. The Indicator Light will
flash blue 3 times to confirm that the headset is now on. Whilst the headset remains on, the Indicator
Light will flash once every 10 seconds.
IMPORTANT:
When using the headset with your PS3 console, press the Function Button once
after switching the headset on to activate it. Until you do this, some games or applications will
not use the headset, even though it is turned on.
To turn the headset off, press and hold the Function Button again for 5 seconds until the Indicator
Light flashes red 3 times.
Registering the Headset with your PS3
The first time you use the headset with your PS3 you will need to register it with the console and
then select it as an Audio Device. Follow these steps:
Registering the Bluetooth® Device
1. Ensure the headset is charged.
2. On your PS3’s browser menu go to ‘Settings’ then ‘Accessory Settings’ and finally ‘Register
Bluetooth Device’.
3. Select ‘Register Headset/Microphone/Headphones’. If prompted you will need to choose ‘Yes’ to
register a new Bluetooth device.
4. To put your headset in registration mode start with it switched off (see previous section). Next turn
it on by pressing and holding the Function Button for around 8 seconds until the Indicator Light
flashes continuously, alternating between blue and red.
5. Press ‘X’ on your controller to start scanning. Your PS3 should find a device called ‘Datel Headset’.
Click ‘X’ again to select this device.
6. When prompted for a Pass Key, enter “0000” and choose ‘OK’.
7. Registration is now complete.
